Business Wire

Ipsen Initiates Partial Clinical Hold for Palovarotene IND120181 and IND135403 Studies

Share

Regulatory News:

Ipsen (Euronext: IPN; ADR: IPSEY) today announced, following discussions with the U.S. Food and Drug Administration (FDA), that a partial clinical hold effective immediately, for the pediatric population under the age of 14 was issued for studies conducted under IND120181 and IND135403 evaluating the investigational drug candidate palovarotene for the chronic treatment of fibrodysplasia ossificans progressiva (FOP) and multiple osteochondromas (MO), respectively. The partial clinical hold applies to the pediatric population (patients under the age of 14 years) currently participating in the Phase 2 (PVO-1A-202/204 and PVO-2A-201) and Phase 3 (PVO-1A-301) studies in all clinical sites at global level. The FDA is allowing the studies to continue to treat patients 14 years of age and older.

The partial clinical hold was issued following recent safety reports submitted by the company to the FDA of cases of early growth plate closure in pediatric patients with FOP treated with palovarotene. The FDA has placed the studies on partial clinical hold pending review of additional details regarding these events and plans to issue additional requests for information within the next 30 days. Although no serious adverse events (SAEs) related to early growth plate closure in the MO study have been reported to date, this study has been included in this hold due to the occurrence of these events with chronic dosing in the FOP program. Since the MO study is a primarily pediatric study with the upper age of enrollment at 14 years, all subjects currently participating in the study will have interruption of treatment until further notice and no new patients will be enrolled while the partial clinical hold is in effect.

At Ipsen, the safety of patients is always a top priority, and the company is committed to ensuring the safe and effective use of its medicines. Ipsen is committed to researching and developing therapies for children and adults living with FOP and MO, two rare and devastating bone diseases with no current therapeutic treatment options.

Ipsen is committed to working diligently with the FDA to provide all requested information with the goal of resolving the partial clinical hold. Ipsen continues to prepare the FDA New Drug Application (NDA) filing for palovarotene in acute/flare-up FOP.

About Ipsen

Ipsen is a global specialty-driven biopharmaceutical group focused on innovation and Specialty Care. The Group develops and commercializes innovative medicines in three key therapeutic areas – Oncology, Neuroscience and Rare Diseases. Its commitment to oncology is exemplified through its growing portfolio of key therapies for prostate cancer, neuroendocrine tumors, renal cell carcinoma and pancreatic cancer. Ipsen also has a well-established Consumer Healthcare business. With total sales over €2.2 billion in 2018, Ipsen sells more than 20 drugs in over 115 countries, with a direct commercial presence in more than 30 countries. Ipsen’s R&D is focused on its innovative and differentiated technological platforms located in the heart of the leading biotechnological and life sciences hubs (Paris-Saclay, France; Oxford, UK; Cambridge, US). The Group has about 5,800 employees worldwide. Ipsen is listed in Paris (Euronext: IPN) and in the United States through a Sponsored Level I American Depositary Receipt program (ADR: IPSEY). For more information on Ipsen, visit www.ipsen.com.

Ipsen—Cautionary Note Regarding Forward-Looking Statements

The forward-looking statements, objectives and targets contained herein are based on the Group’s management strategy, current views and assumptions. Such statements involve known and unknown risks and uncertainties that may cause actual results, performance or events to differ materially from those anticipated herein. All of the above risks could affect the Group’s future ability to achieve its financial targets, which were set assuming reasonable macroeconomic conditions based on the information available today. Use of the words "believes", "anticipates" and "expects" and similar expressions are intended to identify forward-looking statements, including the Group’s expectations regarding future events, including regulatory filings and determinations. Moreover, the targets described in this document were prepared without taking into account external growth assumptions and potential future acquisitions, which may alter these parameters. These objectives are based on data and assumptions regarded as reasonable by the Group. These targets depend on conditions or facts likely to happen in the future, and not exclusively on historical data. Actual results may depart significantly from these targets given the occurrence of certain risks and uncertainties, notably the fact that a promising product in early development phase or clinical trial may end up never being launched on the market or reaching its commercial targets, notably for regulatory or competition reasons. The Group must face or might face competition from generic products that might translate into a loss of market share. Furthermore, the Research and Development process involves several stages each of which involves the substantial risk that the Group may fail to achieve its objectives and be forced to abandon its efforts with regards to a product in which it has invested significant sums. Therefore, the Group cannot be certain that favorable results obtained during pre-clinical trials will be confirmed subsequently during clinical trials, or that the results of clinical trials will be sufficient to demonstrate the safe and effective nature of the product concerned. There can be no guarantees a product will receive the necessary regulatory approvals or that the product will prove to be commercially successful. If underlying assumptions prove inaccurate or risks or uncertainties materialize, actual results may differ materially from those set forth in the forward-looking statements. Other risks and uncertainties include but are not limited to, general industry conditions and competition; general economic factors, including interest rate and currency exchange rate fluctuations; the impact of pharmaceutical industry regulation and health care legislation; global trends toward health care cost containment; technological advances, new products and patents attained by competitors; challenges inherent in new product development, including obtaining regulatory approval; the Group's ability to accurately predict future market conditions; manufacturing difficulties or delays; financial instability of international economies and sovereign risk; dependence on the effectiveness of the Group’s patents and other protections for innovative products; and the exposure to litigation, including patent litigation, and/or regulatory actions. The Group also depends on third parties to develop and market some of its products which could potentially generate substantial royalties; these partners could behave in such ways which could cause damage to the Group’s activities and financial results. The Group cannot be certain that its partners will fulfil their obligations. It might be unable to obtain any benefit from those agreements. A default by any of the Group’s partners could generate lower revenues than expected. Such situations could have a negative impact on the Group’s business, financial position or performance. The Group expressly disclaims any obligation or undertaking to update or revise any forward-looking statements, targets or estimates contained in this press release to reflect any change in events, conditions, assumptions or circumstances on which any such statements are based, unless so required by applicable law. The Group’s business is subject to the risk factors outlined in its registration documents filed with the French Autorité des Marchés Financiers. The risks and uncertainties set out are not exhaustive and the reader is advised to refer to the Group’s 2018 Registration Document available on its website (www.ipsen.com).

Contact information

Media
Christian Marcoux, M.Sc.
Senior Vice President, Global Communications
+33 (0)1 58 33 67 94
Christian.marcoux@ipsen.com

Karla MacDonald
Vice President, Communications, North America
+1 (857) 332-3467
Karla.macdonald@ipsen.com

Financial Community
Eugenia Litz
Vice President, Investor Relations
+44 (0) 1753 627721
eugenia.litz@ipsen.com

Myriam Koutchinsky
Investor Relations Manager
+33 (0)1 58 33 51 04
myriam.koutchinsky@ipsen.com

About Business Wire

Business Wire
Business Wire
24 Martin Lane
EC4R 0DR London

+44 20 7626 1982http://www.businesswire.co.uk

(c) 2018 Business Wire, Inc., All rights reserved.

Business Wire, a Berkshire Hathaway company, is the global leader in multiplatform press release distribution.

Subscribe to releases from Business Wire

Subscribe to all the latest releases from Business Wire by registering your e-mail address below. You can unsubscribe at any time.

Latest releases from Business Wire

Andersen Global Enters Chile With the Addition of Two Collaborating Firms4.8.2020 15:30:00 CESTPress release

Andersen Global enters the Chilean market through Collaboration Agreements with two Santiago-based firms: law firm Chirgwin Peñafiel and tax firm SPASA Consulting. The firms are in close partnership with each other and add depth and breadth to the organization’s Latin American platform as it continues its steady expansion. Founded in 2009, Chirgwin Peñafiel, led by Office Managing Partner Andrés Chirgwin, is a full-service law firm specializing in commercial and corporate law, M&A, energy, labor law and banking & finance. The firm works with a variety of corporate clients, being strongly focused on providing legal support to multinational companies with operations in Chile, while also assisting Chilean-based companies with local and international legal needs. Chirgwin Peñafiel has been recognized by IFLR1000, Leaders League and Best Lawyers. “Our firm is committed to delivering quality, comprehensive solutions to our local and international clients,” Andrés said. “Andersen Global’s cap

Lam Research and VELO 3D Strike Strategic Agreement to Use Metal Additive Manufacturing Applications for Production of Semiconductor Capital Equipment4.8.2020 15:25:00 CESTPress release

Digital manufacturing innovator https://cts.businesswire.com/ct/CT?id=smartlink&url=https%3A%2F%2Fwww.velo3d.com%2F&esheet=52260044&newsitemid=20200804005187&lan=en-US&anchor=VELO3D&index=1&md5=2dc9de05eb81f5b68a6b6bbf24982eea VELO3D and Lam Research Corporation (Nasdaq: LRCX) today announced a joint development agreement that includes collaboration on novel materials and designs in metal additive manufacturing (AM) or 3D printing applications for the semiconductor industry. Lam plans to significantly increase the volume of parts produced by AM over the next five years. This press release features multimedia. View the full release here: https://www.businesswire.com/news/home/20200804005187/en/ The VELO3D Sapphire 3D metal printer (Photo: Business Wire) Additive manufacturing allows transformation of the supply chain from production of parts typically manufactured by subtractive methods, to higher performance, innovative designs that enable agile supply chains to adopt Industry 4.0 prin

Latest Generation YellowScan Mapping Systems Rely on Velodyne Lidar Sensors to Meet Demanding Needs of Survey Professionals4.8.2020 14:00:00 CESTPress release

Velodyne Lidar, Inc. today announced two new generation YellowScan mobile mapping systems use Velodyne’s lidar sensors to help achieve the high precision and accuracy needed in aerial 3D mapping. Velodyne’s powerful lidar sensors generate real-time georeferenced point cloud data that allows YellowScan systems to accurately measure and analyze an area so customers can avoid time-intensive, costly manual surveys. This press release features multimedia. View the full release here: https://www.businesswire.com/news/home/20200804005168/en/ The YellowScan Surveyor Ultra is a high density and long range mapping solution equipped with a Velodyne Ultra Puck™ sensor. (Photo: YellowScan) The YellowScan Surveyor Ultra is a high density and long range mapping solution equipped with a Velodyne Ultra Puck™ sensor and ideally suited for high speed unmanned aerial vehicles (UAV), such as VTOL and helicopter drones. The YellowScan Surveyor is the company’s lightest system – at 1.6 kg including the batte

L&T Technology Services Expands Collaboration With Microsoft to Offer Eco-friendly Solutions for Workplace Transformation4.8.2020 14:00:00 CESTPress release

L&T Technology Services Limited (BSE: 540115, NSE: LTTS), a leading global pure-play engineering services company, today announced that it has expanded its collaboration with Microsoft Corporation and launched its latest and enhanced version of the state-of-the-art i-BEMS™ solution on Microsoft Azure to transform buildings into future-ready smart campuses. With growing digital transformation, there has been a clear impetus on the need for organizations to revamp their office premises to be eco-friendly, taking into consideration sustainability aspects including greenhouse gas and carbon emissions. Another important aspect for office and facility administrators today is to find balance in their buildings to ensure health, safety and wellbeing of their workforce. LTTS’ award-winning Intelligent Building Experience Management System i-BEMS™is a system-of-systems solution that focuses on creating digital experiences and intelligent space management. The cloud-based smart buildings/campus/s

Imricor Announces First Sales Collaboration With Philips4.8.2020 14:00:00 CESTPress release

Imricor Medical Systems, Inc. (Company or Imricor) (ASX:IMR) the worldwide leader in MRI-guided cardiac ablation products, is pleased to announce the first sales collaboration with Philips, a global leader in healthcare technology. This press release features multimedia. View the full release here: https://www.businesswire.com/news/home/20200804005317/en/ Imricor announces first sales partnership with Philips. (Photo: Business Wire) The sales collaboration provides Philips non-exclusive rights to re-sell Imricor’s Advantage-MR System, along with Philips’ industry-leading MRI scanners in European countries that recognize the CE mark. This agreement is the first such agreement signed by Imricor. Imricor’s Chair and CEO, Steve Wedan said: “This agreement is a major milestone for Imricor, allowing Philips to take the lead on driving iCMR lab adoption and enabling us to focus on supporting utilization, growing our portfolio of consumable devices and expanding our indications for use. In thi

Sumitomo Corporation of Americas Makes Strategic Investment in Sintavia4.8.2020 13:59:00 CESTPress release

Sumitomo Corporation of Americas (“SCOA”), the largest subsidiary of Sumitomo Corporation, one of the world’s largest traders of goods and services, announced today that it entered into an agreement to increase its investment in Sintavia, LLC (“Sintavia”), the Aerospace and Space industry’s leading Tier One metal additive manufacturer, based in Hollywood, FL. The parties jointly announced that the minority investment, which follows an initial investment by SCOA in 2018, will be used to fund Sintavia’s rapidly growing business of providing additively manufactured parts to the world’s largest Aerospace and Space companies. Terms of the deal were not disclosed. This press release features multimedia. View the full release here: https://www.businesswire.com/news/home/20200804005311/en/ Brian Neff (left), CEO of Sintavia, and Kevin Hyuga (right), SVP and General Manager of Sumitomo Corporation of Americas (2018 file photo) (Photo: Business Wire) The investment will help Sintavia scale its p