AGC to Exhibit Next-generation Mobility-enabling Products & Technologies at CES2023

AGC, the provider of a wide range of solutions from automotive and display glass to the cutting-edge materials essential for next-generation mobility, will exhibit at CES2023, the world's leading technology trade show, being held in Las Vegas during January 3-8, 2023. The 3rd and 4th will be reserved for media and pre-show keynotes; the fair will be open to the public from the 5th. The company will exhibit 17 of its products, including several brand new releases.

This press release features multimedia. View the full release here: https://www.businesswire.com/news/home/20221204005064/en/

AGC has been a leading manufacturer of architectural, automotive and display glass for more than 110 years, supplying high-quality products worldwide. Today, the company leverages its technological expertise in the fields of glass, electronics, chemicals, and ceramics to provide a variety of cutting-edge materials and services that meet the growing demand for autonomous driving and other mobility services.

One of the highlights of AGC’s exhibits at CES will be the company’s FIR (far infrared) camera-compatible windshield, featuring special glass that allows far-infrared rays to penetrate, something which ordinary automotive glass does not. This allows sensor fusion of regular visible and FIR cameras mounted behind the windshield and reduces the risk of accidents involving pedestrians and cyclists at night or in bad weather.

Another highlight of the exhibit will be AGC’s glass composition and processing technologies; these provide the strength and optical capabilities needed to mount and deploy the cameras and the LiDAR (light detection and ranging) components required for autonomous driving. A wide range of other solutions will also be exhibited, including the 5G-sub6 Glass Antenna and the 3D Curved Cover Glass For Automotive Interior Displays. For a complete list, please refer to the Appendix.

Yoshinori Hirai, President & CEO of AGC, commented, “CES is one of the world's most influential technology trade shows, and we see it as the best stage on which to showcase AGC's capabilities to the world. We strongly believe our next-generation mobility-related products and solutions will create a buzz among CES visitors. The materials we offer have an appeal that can only be successfully conveyed when they are seen and experienced up close. We hope that as many people as possible will learn firsthand about the value we offer and make good use of our products.”

Please stop by our booth and see the various ways in which AGC is pushing the boundaries of technology. If you would like to interview an AGC spokesperson, please contact us.

Booth information
LVCC - West Hall
Vehicle Tech & Advanced Mobility
#4377

In the same West Hall there will be a separate booth (#6557) dedicated to our "Wideye" solutions and another for our "FeelinGlass" product (#6674).

About CES

Owned and produced by the Consumer Technology Association (CTA)®, CES® is the world’s most influential tech event; the proving ground for breakthrough technologies and global innovators where the world's biggest brands do business and meet new partners, and the sharpest innovators hit the stage. CES 2023 will showcase the latest technological innovations dedicated to addressing the world’s most pressing global challenges in support of the United Nations’ efforts to advance human security for all. Please visit https://www.ces.tech/ for further details.

About AGC Inc.

AGC Inc. (Headquarters: Tokyo, President & CEO: Yoshinori Hirai) is the parent company of the AGC Group, a world-leading glass solution provider and supplier of flat, automotive and display glass, chemicals, ceramics and other high-tech materials and components. Building on more than a century of technical innovation, the AGC Group has developed a wide range of cutting-edge products. The Group employs some 56,000 people worldwide and generates annual sales of around 1.7 trillion Japanese yen (approx. US$ 12.3bn) through its operations in more than 30 countries and regions. For more information, please visit https://www.agc.com/en/index.html

Appendix (List of exhibited products and technologies)

Product Name	Brand name	Usage/Application	Appearing for the first time?	Features
FIR (far infrared) camera-compatible windshield		Automotive windshields	Yes	Small parallax between Visible and FIR cams: enables sensor fusion Sensor is positioned in screen area covered by windshield wipers, ensuring clear field of vision High sensor position: secure FOV and sensor protection
5 G-sub 6 Glass Antenna		Automotive Glazing	Yes	"Protrusion-less design” 4x4 MIMO antenna system can be configured on one windshield Bandwidth: 617MHz to 6GHz, Gain: +3 dBi or less (average) FCC standard-compliant
3D Curved Cover Glass For Automotive Interior Displays		Automotive Interior Display - Center Information / Cluster / Passenger Display	No	Sophisticated interior design featuring By In-Vehicle Design Glass 3D (hot-bending) molding technology Anti-reflection / Anti-fingerprint coating
Porous Aminosilica		CO2 Direct Air Capture (DAC) / Acid gas removal / Zero gas emission from factories and automobiles	Yes	Captures CO2 using less energy Desorbs CO2 at lower temperatures Air-stable and heat-resistant amines are applied
Thermal Conductive-Electrical Insulation Film		Thermal interface material for power semiconductors	Yes	Achieves both high thermal conductivity and dielectric breakdown voltage, high heat resistance, flexibility, adhesion (additional functions)
Super-Hydrophobic Glass		Window and roof glass for mobility applications; cover glass for sensors	Yes	Surface micro-structured glass Water contact angle 150 degrees or more High transparency, high durability
Windshield damage detection smart sensor	Jack by AGC	Self-powered device that detects, diagnoses and notifies in real-time glass damage to windshields	Prototype has been previously presented	Simplifies repairs and optimizes maintenance costs Aesthetic and seamless design Remote and real-time notifications
Glass B-Pillar With Invisible Sensor Integration	Wideye by AGC	Lateral integration of a LiDAR sensor in a B-Pillar made of infrared transparent glass	Prototype has been previously presented	Parking space detection Facial recognition for use in access control Excellent optical transmission and performance, robustness and reliability, aesthetic and seamless design
Cover Glass	EG-A1, EG-A2	LiDAR, Camera	Yes	Stone Impact Test (ISO20567, SAE/J400 compatible) Ball Drop Test (IK07 compatible) Excellent wear resistance Excellent optical properties Excellent environmental resistance
Aspherical Glass Lenses	Aspherical Glass Molded Lenses	LiDAR, Camera, Projector, Optical communication, AR/VR/MR, Lighting	No	Size: sub-mm to 50mm in diameter Lens types: square, cylindrical, toroidal, MLA
Optical Filter	IR Pass Filter, Band Pass Filter, Mirror	Cover/noise removal for LiDAR, Camera, UV disinfection, semiconductor manufacturing	No	Customizable optical characteristics High reliability Functionality such as hydrophobic coating, heater, EMC can be added
Glass Ceramics Substrate	GCHPTM	LEDs, semiconductors, lasers	No	Superior heat dispersal Highly reflective More compact design thanks to the use of 3D circuits
DOE and Diffuser	DOE and diffuser	ToF sensor, LiDAR, cameras, projectors, optical communication, AR/VR/MR, lighting	No	High reliability Highly efficient Very large FOV and high density dot projection
Anti-glare glass	New AG (anti-glare) glass for high-definition panels	High-definition notebook PCs, tablets and monitors	Yes	The surface is finely textured to diffuse reflected light, which reduces glare and eye strain. Retains anti-glare properties, while offering the "low glare" capabilities that enable 4K compatibility, making it compatible with high-definition panels.
Chemically engineered high strength glass	Dragontrail	Cover glass for displays of smartphones, tablets, PCs, etc. (electronic devices requiring cover glass)	No	High strength High scratch resistance Stable production using float manufacturing method
FWA antenna	"5G Millimeter Wave Transparent Antenna for FWA "	Antenna is thin and transparent, so it appears to be an integral part of the window pane and does not obstruct the view. We propose embedding it in window glazing, where it will receive base station signals and allow everyone to access high-speed internet indoors.	No	Creates a Wi-Fi communication area inside buildings while maintaining a high level of brightness without compromising the view. No special tools or engineering are required as all parts are installed indoors.
Transparent Reflector Fence		Local 5G networks	Yes (overseas)	A new transparent industrial fence Coverage in 5G radio quiet zones and shadowed areas

To view this piece of content from cts.businesswire.com, please give your consent at the top of this page.

View source version on businesswire.com: https://www.businesswire.com/news/home/20221204005064/en/

Contact information

Overseas media inquiries

Media Inquiries
Public Relations, AGC Inc.
Marunouchi 1-5-1, Chiyoda-ku, Tokyo 100-8405 JAPAN
Tel: +81 (0)3-3218-5603

Weber Shandwick Japan
Reina Matsushita; tel: +81 (0)80 2375 0295
Masashi Nonaka; tel: +81 (0)80 1037 7879
E-mail rmatsushita@webershandwick.com / mnonaka@webershandwick.com