Lahontan Announces Increase in Mineral Resources at Santa Fe: 1,539,000 Au Eq oz Indicated, and 411,000 Au Eq oz Inferred
15.10.2024 07:00:00 CEST | ACCESS Newswire | Press release
TORONTO, ON / ACCESSWIRE / October 15, 2024 / Lahontan Gold Corp. (TSXV:LG)(OTCQB:LGCXF) (the "Company" or "Lahontan" ) is pleased to announce an updated Mineral Resource Estimate ("MRE") for its flagship Santa Fe Mine, a past-producing open pit, heap leach, gold and silver mine, located in Nevada's prolific Walker Lane. The MRE for Santa Fe is based upon 988 drill holes totaling 97,281 metres, including 79 drill holes totaling 19,151 metres drilled by Lahontan since 2021.
Highlights of the MRE include:
Project-wide pit constrained resources increase significantly: Indicated Mineral Resources of 1,539,000 contained gold equivalent ("Au Eq") ounces and Inferred Mineral Resources of 411,000 contained Au Eq ounces (assumptions for Au Eq are described in the Notes to Table 1).
Indicated Resources increased by 427,000 Au Eq ounces compared to the 2023 MRE, an increase of 38% .
Project-wide average grade for the Indicated Mineral Resource is 0.99 g/t Au Eq ; the average grade of the Project-wide Inferred Mineral Resource is 0.76 g/t Au Eq (please see Table 1).
Shallow Slab-Calvada-York oxide resources expand dramatically: Indicated Oxide Resources total 9.72 Mt grading 0.65 g/t Au Eq for 204,000 Au Eqounces and Inferred Oxide Resources total 11.55 Mt grading 0.53 g/t Au Eq for 198,000 Au Eq ounces, accounting for 47% of the total oxide gold and silver resources at the project and nearly double the number ounces reported in the 2023 MRE.
The MRE block model shows that gold and silver mineralization extends well beyond the conceptual pit shells, generating high-quality targets for additional drilling and resource growth, especially the northern extension of the Slab deposit (please see map below).
Kimberly Ann, Founder, Executive Chair, CEO, and President of Lahontan Gold Corp commented: "Lahontan is excited by the results of this updated MRE for the Santa Fe Mine, particularly the large growth of Indicated Resources and the continued expansion of the shallow Slab and Calvada oxide gold and silver deposits. The MRE will form the basis of a Preliminary Economic Assessment ("PEA") of the Santa Fe Mine. The PEA will examine mining and process options for resuming production utilizing low-cost open-pit mining and heap leach processing. Our technical consultants, Kappes, Cassiday and Associates ("KCA") and RESPEC Company LLC ("RESPEC"), both based in Reno, Nevada, are well advanced at project planning, mine design, finalizing the process flow sheet, and optimizing crushing throughput. The Company has been using these preliminary designs to begin its State level mine permitting process while simultaneously completing it Exploration Plan of Operation ("EPOO") with the Federal Bureau of Land Management ("BLM"). Once the EPOO is submitted to the BLM, a draft Mine Plan of Operations ("MPOO") will be completed utilizing all the technical sections from the EPOO and both documents can proceed in parallel. With the release of the updated MRE and the soon to be completed PEA, Lahontan is at an exciting inflection point in its growth and we look forward to continuing our evolution from a junior explorer to a mine development company."
Table 1: Project-wide Resources, Santa Fe Mine, Mineral County, Nevada.
Notes to Table 1:
Mineral Resources have an effective date of October 9, 2024. The Mineral Resource Estimate for the Santa Fe Mine was prepared by Trevor Rabb, P.Geo., of Equity Exploration Consultants Ltd., an independent Qualified Person as defined by NI 43-101.
Mineral Resources are not Mineral Reserves and do not have demonstrated economic viability. Inferred Resources are considered too speculative geologically to have economic considerations applied to them that would enable them to be classified as Mineral Reserves. An Inferred Mineral Resource has a lower level of confidence than that applying to an Indicated Mineral Resource and must not be converted to a Mineral Reserve. It is reasonably expected that most of the Inferred Mineral Resources could be upgraded to Indicated Mineral Resources with continued exploration.
Resources are reported in accordance with NI43-101 Standards of Disclosure for Mineral Projects (BCSC, 2016) and the CIM Definition Standards for Mineral Resources and Mineral Reserves (CIM, 2014).
Mineral Resources were estimated for gold, silver, and gold equivalent (Au Eq) using a combination of ordinary kriging and inverse distance cubed within grade shell domains.
Mineral resources are reported using a cut-off grade of 0.15 g/t Au Eq for oxide resources and 0.60 g/t Au Eq for non-oxide resources. Au Eq for the purpose of cut-off grade and reporting the Mineral Resources is based on the following assumptions gold price of US$1,950/oz gold, silver price of US$23.50/oz silver, and oxide gold recoveries ranging from 45% to 79%, oxide silver recoveries ranging from 10% to 30%, and non-oxide gold and silver recoveries of 71%, mining costs for resource and waste of US$2.50/t, processing cost (oxide) US$3.49/t, processing cost (non-oxide) US$25/t.
An optimized open-pit shell was used to constrain the Mineral Resource and was generated using Lerchs-Grossman algorithm utilizing the following parameters: gold price of US$1,950/oz gold, silver price of US$23.50/oz silver, and selling costs of US$29.25/oz gold. Mining costs for resource and waste of US$2.50/t, processing cost (oxide) US$3.49/t, processing cost (non-oxide) US$25/t, G&A cost US$1.06/t. Royalties for the Slab, York and Calvada deposits are 1.25%, and maximum pit slope angles of 50 degrees.
Totals may not sum due to rounding.
About the Santa Fe Mine:
The Santa Fe Mine is in the Walker Lane mineral belt of western Nevada approximately 50 km from the town of Hawthorne in Mineral County. Nearby operating gold and silver mines include Isabella Pearl (Fortitude Gold) and Borealis (Borealis Mining). The Santa Fe Mine consists of four past-producing open-pits, including the Santa Fe, Slab, Calvada East, and York deposits, within a 26.4 km 2 land package 100% controlled by Lahontan. The Santa Fe Mine had past production of 356,000 ounces of gold and 784,000 ounces of silver between 1988 and 1995 from open pit mines utilizing heap-leach processing (Nevada Division of Minerals, www.ndomdata.com) Mineralization occurs as disseminated gold and silver hosted by Triassic age calcareous rocks. Strong stratigraphic and structural controls of mineralization is evident. Considerable exploration potential remains at Santa Fe and the Company intends to continue its aggressive exploration and permitting program in 2024 and into 2025.
Santa Fe Oxide Resources:
Oxide resources at the Santa Fe Mine occur at both the Santa Fe deposit and the Slab-Calvada Complex which includes the Slab, Calvada East, York, and Calvada Central deposits. The contained Au Eq oxide ounces for the Slab-Calvada Complex accounts for approximately 32% of the total Indicated Au Eq oxide ounces and over 90% of the total Inferred Au Eq oxide ounces. Mineral Resources at the Slab-Calvada Complex are shallow and locally exposed at surface, leading to potentially very low strip ratios. Oxide resources are open to the north and northeast of the Slab open pit, along the Calvada Fault, and at the York open pit.
The balance of the oxide resources are within the Santa Fe deposit, accounting for 68% of Indicated contained Au Eq oxide ounces, and 10% of Inferred AuEq oxide ounces. Oxide Mineral Resources within the Santa Fe deposit are primarily located in the northeast high wall of the Santa Fe open pit. The average grade of the Santa Fe deposit Indicated oxide resource is 0.70 g/t Au Eq, with locally higher grade zones that may serve as a starting point for future mining operations. Oxide resources at the Santa Fe deposit are open to the northeast, south, and southeast.
Santa Fe Non-Oxide Resources:
Non-oxide resources at the Santa Fe Mine are principally located in the Santa Fe deposit below the oxide resources and within the resource pit shell. The average grade of the Santa Fe deposit Indicated non-oxide resource is 1.45 g/t Au Eq and the Santa Fe deposit Inferred non-oxide mineral resource is 1.55 g/t Au Eq. Gold is very fine-grained and associated with pyrite. Within the southeastern portion of the Santa Fe deposit, higher-grade gold and silver resources may positively influence future project economics. Higher grade gold and silver mineralization extends to the southeast of the Santa Fe deposit, along strike and down-rake, providing excellent exploration opportunities to grow the non-oxide resources at Santa Fe.
Metallurgical Domains:
Modelling criteria for the oxide metallurgical domain is based on the ratio of gold by fire assay to gold by cyanide leach (extraction values). The ratio thresholds for the oxide metallurgical domain in the Santa Fe deposit used values of 80% and greater, and 60% and greater for Calvada (Slab, Calvada Central, Calvada East and York). Modelling the transitional metallurgical domain used ratios of less than 80% and greater than 50% for Santa Fe, and less then 60% to 30% for Calvada. The non-oxide metallurgical domain ("fresh" rock) was defined by ratios of less than 50% for Santa Fe and less than 30% for the Calvada area deposits.
Estimation Approach:
Lithology and gold and silver bearing domains were modelled using Leapfrog 2024. These domains are mainly defined by logged jasperoid and limestone-breccia lithologies and continuity of gold grades above 0.1 g/t gold. Metallurgical domains for oxide, transition and non-oxide were modelled based on ratio of cyanide leachable gold assay values to fire assay gold values in addition to drillhole logs recording abundance of pyrite and oxidation intensity. Transition material represents approximately 25% of oxide tonnes and comes almost entirely from the Santa Fe deposit. Transition domain material is included in the oxide resource. Domains representing lithology, weathering and mineralization models were assigned to a block model with a block size of 5 m x 5 m x 6 m. Average bulk densities representative of the mineralization and lithology models were assigned to the block model and vary from 2.4 t/m 3 to 2.6 t/m 3 .
Grade capping and outlier restrictions were applied to gold and silver values and interpolation parameters respectively. Top cut values for gold and silver were evaluated for each domain independently prior to compositing to 1.52 m lengths that honor domain boundaries. Estimation was completed using Micromine Origin with Ordinary Kriging (OK) and Inverse Distance cubed (ID 3 ) interpolants. Blocks were classified in accordance with the 2014 CIM Definition Standards. The nominal drillhole spacing for Indicated Mineral Resources is 50 m or less. The nominal drillhole spacing for Inferred Mineral Resources is 100 m or less.
Prospects for eventual economic extraction were evaluated by performing pit optimization using Lerchs-Grossman algorithm with the following parameters: gold price of US$1,950/oz gold, silver price of US$23.50/oz silver, selling costs of US$29.25/oz gold. Mining costs for resource and waste of US$2.50/t, processing cost (oxide) US$3.49/t, processing cost (non-oxide) US$25/t, G&A cost US$1.06/t. Royalties for the Slab, York and Calvada deposits are 1.25%. Maximum pit slope is 50 degrees. Processing recoveries range from 45% to 79% for oxide, silver recoveries range from 10% to 30% for oxide and non-oxide gold and silver recoveries are 71%.
About Lahontan Gold Corp and Filing of Report:
Lahontan Gold Corp. is a Canadian mine development and mineral exploration company that holds, through its US subsidiaries, four top-tier gold and silver exploration properties in the Walker Lane of mining friendly Nevada. Lahontan's flagship property, the 26.4-km 2 Santa Fe Mine project, had past production of 356,000 ounces of gold and 784,000 ounces of silver between 1988 and 1995 from open pit mines utilizing heap-leach processing (Nevada Division of Minerals, www.ndomdata.com). The Santa Fe Mine has a Canadian National Instrument 43-101 compliant Indicated Mineral Resource of 1,539,000 oz Au Eq(grading 0.99 g/t Au Eq) and an Inferred Mineral Resource of 411,000 oz Au Eq (grading 0.76 g/t Au Eq), all pit constrained (Au Eq is inclusive of recovery, please see Lahontan Press Release dated October 15, 2024). The Company will continue to aggressively explore Santa Fe during 2024 and complete a Preliminary Economic Assessment ("PEA") evaluating development scenarios to bring the Santa Fe Mine back into production.
To support this Santa Fe MRE, a technical report prepared according to National Instrument 43-101 ("Report") will be filed on SEDAR within the next 45 days. The independent Qualified Person responsible for the MRE disclosure for the Santa Fe Mine is Trevor Rabb, P.Geo., of Equity Exploration Consultants Ltd., in accordance with National Instrument 43-101 Standards of Disclosure for Mineral Projects. In accordance with National Instrument 43-101 Standards of Disclosure for Mineral Projects, Quentin J. Browne, P.Geo., Consulting Geologist to Lahontan Gold Corp., is the Qualified Person for the Company and approved the technical content of this news release.
On behalf of the Board of Directors
Kimberly Ann
Executive Chair, Founder, CEO, and President
FOR FURTHER INFORMATION, PLEASE CONTACT:
Lahontan Gold Corp.
Kimberly Ann
Executive Chair, Founder, CEO, and President
Phone: 1-530-414-4400
Email: Kimberly.ann@lahontangoldcorp.com
Website: www.lahontangoldcorp.com
Cautionary Note Regarding Forward-Looking Statements:
Neither TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.
Except for statements of historic fact, this news release contains certain "forward-looking information" within the meaning of applicable securities law. Forward-looking information is frequently characterized by words such as "plan", "expect", "project", "intend", "believe", "anticipate", "estimate" and other similar words, or statements that certain events or conditions "may" or "will" occur. Forward-looking statements are based on the opinions and estimates at the date the statements are made and are subject to a variety of risks and uncertainties and other factors that could cause actual events or results to differ materially from those anticipated in the forward-looking statements including, but not limited to delays or uncertainties with regulatory approvals, including that of the TSXV. There are uncertainties inherent in forward-looking information, including factors beyond the Company's control. The Company undertakes no obligation to update forward-looking information if circumstances or management's estimates or opinions should change except as required by law. The reader is cautioned not to place undue reliance on forward-looking statements. Additional information identifying risks and uncertainties that could affect financial results is contained in the Company's filings with Canadian securities regulators, which filings are available at www.sedar.com
SOURCE: Lahontan Gold Corp
View the original press release on accesswire.com
Lahontan Gold Corp

Subscribe to releases from ACCESS Newswire
Subscribe to all the latest releases from ACCESS Newswire by registering your e-mail address below. You can unsubscribe at any time.
Latest releases from ACCESS Newswire
Polaris Modifies Quorum Requirement for Upcoming AGM24.6.2026 23:05:00 CEST | Press release
TORONTO, ON / ACCESS Newswire / June 24, 2026 / Polaris Renewable Energy Inc. (TSX:PIF) ("Polaris" or the "Company") announced today that its Board of Directors has approved an amendment to the Corporation's by-law to modify the quorum requirement for shareholder meetings. The amendment will apply to the annual meeting of shareholders (the "Meeting") to be held on June 26, 2026 at 9:00 a.m. (Toronto time). Under the Corporation's by-laws, quorum for shareholder meetings previously required the presence, in person or by proxy, of holders of a majority of the outstanding shares entitled to vote at the meeting. The amended by-law provides that quorum will consist of one person present, in person or represented by proxy, holding or representing not less than 45% of the outstanding shares of the Company entitled to vote at the meeting. The amendment does not change the level of shareholder approval required to approve any matter at the Meeting. The amendment is effective as of the date of a
Datavault AI Inc. (NASDAQ: DVLT) and WiSA Technologies Announce the Goho LS7 2.0 and 5.1 Home Theater Systems with WiSA E Wireless Connectivity23.6.2026 16:10:00 CEST | Press release
WiSA Technologies, a Datavault AI Company, powers wireless connectivity for two new home theater and karaoke systems from Goho, a brand of Goldhorn WISA E solves critical cross-brand interoperability problems, providing ubiquity on an enterprise scale for another of the world's premium acoustic brands. PHILADELPHIA, PA / ACCESS Newswire / June 23, 2026 / Datavault AI Inc. (NASDAQ:DVLT), through its Acoustic Sciences division's WiSA Technologies, today announced integration of the WiSA E Enterprise module in the new LS7 2.0 and 5.1 wireless home audio and karaoke systems from Goho, a brand of Goldhorn. These two stunning new systems are designed to bring high-definition two-channel and immersive 5.1 channel surround sound into the home entertainment environment with the simplicity and reliability of WiSA wireless audio transmission. "Goldhorn has built a strong reputation for delivering premium audio components to the mobile audio market, and we are very excited to enter the home audio
CTO Confidence in Scaling AI Falls for Third Straight Year, Akkodis Report Finds23.6.2026 06:45:00 CEST | Press release
"What CTOs Think 2026: Scaling the agentic enterprise with confidence" reveals for the first time, innovation, not efficiency, as the primary driver of digital investment, signaling a move from cost-focused optimization toward growth. ZURICH, SWITZERLAND / ACCESS Newswire / June 23, 2026 / New research released today by Akkodis, a global leader in digital engineering consulting and part of the Adecco Group, shows that CTO confidence in scaling AI is declining, falling to 48% in 2026 from 82% in 2024 - even as AI adoption accelerates and enterprises face growing pressure to turn ambition into execution at scale. Image: What CTOs Think 2026: Scaling the agentic enterprise with confidence. Source: Akkodis The third edition of Akkodis' What CTOs Think report, What CTOs Think 2026: Scaling the agentic enterprise with confidence, features insights from 500 Chief Technology Officers (CTOs) as part of the Adecco Group's Business Leaders 2026 research of 2,000 C-suite executives, The human prem
LiberNovo Prime Sale Fully Launches June 23: Full Chair Lineup and Accessories, Up to 49% Off23.6.2026 04:00:00 CEST | Press release
The limited Omni Premium Bundle headlines a flash sale across the EU and UK, stacked with tiered gifts, a prize wheel, and triple loyalty points, from June 23 through July 11. HONG KONG, HK / ACCESS Newswire / June 22, 2026 / LiberNovo today opened one of its biggest sales of the year. From June 23 through July 11, the entire collection goes on sale across the EU and UK with savings of up to 49% off, and the headline deal is the Omni Premium Bundle: a limited flash-sale price on the original Omni, starting from €939 ( £869) up to 49% off, the chair that started it all, available only while clearance stock lasts. Accessories and the rest of the range join at Prime Sale pricing too, making it the best time of the year to build your complete setup. Every LiberNovo chair is built on the world's first dynamic ergonomic design. A flexible backrest bends and moves with you as you shift, lean, and change position, so your support follows your body instead of holding you in one pose. A powered
Leggett Dynamics Launches Mid-Class Massage System & Makes Luxury Comfort Accessible on High-Volume Programs22.6.2026 13:00:00 CEST | Press release
DETROIT, MI / ACCESS Newswire / June 22, 2026 / Leggett Dynamics today launched its Mid-Class Massage System (MCM), a breakthrough non-electronic innovation that makes premium massage more accessible beyond the luxury vehicle segment. Now in production with a global OEM, MCM was also shortlisted for the 2026 Auto Tech Partnership Award for industry-leading innovation and collaboration. Breakthrough by Design MCM creates a distinctive massage experience with a compact 30 x 35 mm module that uses the Coandă effect, an air jet's natural tendency to follow a curved surface. With no electronics or moving parts, it reduces complexity and cost, making a premium experience accessible to more vehicle segments and consumers. Balancing Innovation, Speed and Cost "Automakers must balance innovation, speed and cost while consumers expect more personalized, affordable, premium experiences," said Julien Rea, VP of Global Innovation & Engineering at Leggett Dynamics. "Leggett Dynamics' Mid-Class Massa
In our pressroom you can read all our latest releases, find our press contacts, images, documents and other relevant information about us.
Visit our pressroom